Arcane University: Implementation of Custom Animations

The Beyond Skyrim Wiki — Hosted by UESP
Revision as of 09:32, 20 November 2024 by Thingy Person (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
< Arcane University:Implementation

This article describes how to implement fully custom animations into Skyrim with no external runtime dependencies. All credit to Jonahex for figuring out the workflow and drafting the article. (subsequently edited by Thingy Person, caveat emptor)

Tools[edit]

1. ck-cmd. An up to date build, preferably from SpectralPlatypus' fork, is required for custom creature implementation. Can be downloaded from github.
Although it is now recommended to use ck-gui and its graphical user interface, this guide was written for the old way of using ck-cmd as a command line tool. The following commands are useful for animation implementation:
1) convert. Used for conversion between binary and xml representation of Havok (.hkx) files.
convert <input file path> -o <output file path> -v WIN32 -f SAVE_DEFAULT — to convert xml to Skyrim LE hkx.
convert <input file path> -o <output file path> -v AMD64 -f SAVE_DEFAULT — to convert xml to Skyrim SE hkx.
convert <input file path> -o <output file path> -f SAVE_TEXT_FORMAT — to convert Skyrim LE hkx to xml.
Fun fact #1: ck-cmd can't convert SE back to xml, but you can try to use a newer utility called hkxconv.
2) importrig. Used to import a skeleton from fbx to nif and hkx.
importrig <input fbx path> -a <animation output folder path> -e <nif output folder path>.
Fun fact #2: the skeleton hkx will be saved to the folder where ck-cmd.exe is located, no matter which output paths you set.
Fun fact #3: you usually don’t need animation output, but you need to set the animation output folder anyway, as the command doesn’t work without it.
3) exportfbx. Used to export nifs back to fbx.
exportfbx <input nif path> -e <output folder path>.
4) importskin. Used to import creature or armor skin from fbx to nif.
importskin <input fbx path> -e <output folder path>.
5) retargetcreature. This command copies a creature Havok project, replacing the creature name in all instances where it’s needed and creating an esp with idles, sound descriptors and movement types for the new creature.
retargetcreature <path to source creature file in meshes\animationdata> <path to source creature Havok project folder> <new creature name> -s <Skyrim LE folder path>.
Fun fact #4: there is no output folder argument. The esp will be placed in your Skyrim LE Data folder. All other output is stored in the ck-cmd folder. It includes animationdata and animationsetdata folders, animationdatasinglefile.txt, animationsetdatasinglefile.txt and a <new creature name> folder with the new Havok project.
6) importanimation. Used to export fbx animations to hkx.
importanimation <path to skeleton hkx file> <path to fbx animation file or folder with animations> --b=<path to creature behavior folder> --c=<path to your creature animation cache file, i.e., animationdata\<your creature’s name>project.txt> --e=<output animations folder>.
Fun fact #5: but the animationdata and animationsetdata folders, animationdatasinglefile.txt, and animationsetdatasinglefile.txt will all be stored in the ck-cmd folder!
Fun fact #6: though they won’t be generated if the folder that is passed to the --b argument contains a <your creature's name>project.txt with upper case letters in the file name.
And the final ck-cmd fun fact: if any folder path in a command ends in a (back)slash, ck-cmd will crash.
2. Skyrim Behavior Tool. GUI tool for behavior editing. You need a build of Jonahex's personal fork (download it from github) as upstream has some bugs. Note: ck-gui can also do some behavior editing (whereas ck-cmd cannot), but it is very inconvenient and prone to breakage at this time.
The newer utility Haviour is said to be a lot more user-friendly than Skyrim Behavior Tool, but this tutorial was not written around it.

Preparation[edit]

It is possible to create a behavior from scratch, or start from a pre-existing create as a base. Using the "Create new behavior" feature in Skyrim Behavior Tool will give you an empty havok project. You can then add onto this empty behavior to get what you want, but this is very challenging. Starting from a pre-existing creature is much easier, so this guide was written under the constraint that you'll need to import one first.

Under this constraint, you need Skyrim LE Havok projects and animation cache. So, extract Skyrim – Animations.bsa. It contains all Havok projects in the game, as well as animationdata and animationsetdata folders and animationdatasinglefile.txt and animationsetdatasinglefile.txt files. For manual editing of behaviors, you can further convert Havok (hkx) files to xml with ck-cmd.

Custom animated creature implementation[edit]

Let’s say you have a custom creature modeled and animated, and its animations follow those of an existing creatures which we will call donor. The donor's behavior graph will be used as a baseline for the new creature. The custom creature may have animations that differ from those of the donor creature (both in number and characteristics) and also have a different skeleton (both in number and placement of bones), but the more differences there are, the more the behavior has to be edited in later steps.

Export the creature to fbx format, ideally where Y is forward and Z is up, and with the root bone positioned at the origin; also disable "add leaf bones" (if using blender) and export animations one-by-one. This results in the following files:

1. Skinned mesh in fbx.
2. Skeleton with collision in fbx.
3. Animations in separate fbx files.

This is what you need to do to implement it:

1. Use ck-cmd importskin command to import skin fbx to nif. Rename root bone in imported nif to NPC Root [Root].
2. Use ck-cmd importrig command to import skeleton fbx to nif and hkx.
3. Use ck-cmd retargetcreature command to copy donor Havok project. This will result in a havok project with the name <ProjectName>Project.hkx and 4 folders:
  • animations, with animation hkx files
  • character, with <ProjectName>character.hkx, where various misc info about the creature is stored
  • character assets, with skin and skeleton
  • behaviors, with behavior hkx files
Note that editing something in a hkx file means first converting it to xml, editing xml and then converting back to hkx.
Example of a bone pair map in a character.hkx file that has been converted to xml. Here, bones 0 through 8 are listed in order so are not paired to anything; but bone number 10 is the 9th element in line (counted from 0 upwards) so bones 10 and 9 are paired, and so on.
4. Adjust the bone pair map, which is needed for mirrored animations to work. It is located inside Characters\<creature name>Character.hkx in the hkobject hkbMirroredSkeletonInfo under the parameter bonePairMap. It is a list of bone indices (starting from 0) and the order in which each one is listed represents the bone it is paired to (also starting from 0). If the bone index is the same number as its rank order, the bone is "paired to itself" and thus not mirrored. For example, if your skeleton includes the following bones: root, pelvis, leg_left, leg_right, your bone pair map is 0 1 3 2.
In order to figure out which bone index refers to which part of the skeleton, you can find the list of bones in the skeleton.hkx file and count their rank order numbers yourself, or find the same list of bones automatically enumerated in Skyrim Behavior Tool (tab Character Data, panel NPC Root [Root]); take care because this list is numbered starting from 1 rather than from 0, so subtract 1 from each number before putting it in the bone pair map.
5. Use ck-cmd importanimation command to import fbx animations to hkx. Make sure to set the --b argument to the donor behavior folder, and the --c argument to the retargeted animation cache file!
6. Now collect all the files and put them in the relevant locations inside the Skyrim SE Data folder:
  • animationdata and animationsetdata folders and animationdatasinglefile.txt, animationsetdatasinglefile.txt files from importanimation command to Meshes folder.
  • Havok project from retargetcreature command to where you store your creatures, probably Meshes\<project name>\Actors\<creature name>.
  • Skin, skeleton.nif and skeleton.hkx to <Havok project folder>\Character Assets\.
7. Now take the esp file generated by the retargetcreature command and load it in the CK. Create race, armor addon, armor and actor records for your creature. In the armor addon, set paths to the skin. In the race, set paths to the skeleton and the Havok project, and the generated movement types. Check the generated IDLE records – the paths there may need to be adjusted to where you actually stored your Havok project.

If everything was done right, your creature animations should now work in game! But there are a lot of things to tweak in behaviors…

Root motion[edit]

Your animations may include root transform, which describes the movement of the creature’s center of mass. Skyrim's engine handles it in a very special way. Hkx animations actually can contain only Z translations and X and Y rotations of the root. X and Y components of translations and Z and W components of rotation are stripped from animations by ck-cmd's importanimation command and are stored in a text cache in the animationdata\boundanims folder (and in animationsdatasinglefile.txt). Translation and rotation of the creature are instead determined by the engine. Movement speed is defined by the creature’s movement type. Most creatures have several animations for movement, which are blended depending on movement speed. In order to make a creature's movement animation synchronized with its motion, one needs to do two things:

1. Set walking and running speed in movement types to actual speed values for which respective animations are made.
Skyrim Behavior Tool view of the bear's behavior graph, where a hkbBlenderGeneratorChild responsible for one of the blended animations (a slow trot) is highlighted. Its weight has been set to 197.475998; for speeds higher than this weight, the slow trot animation will be blended with the animation faster than this one, and for lower speeds, the animation slower than this one.
2. Open your creature’s behavior and find the hkbBlenderGenerator of a given movement animation. Each of its children (a hkbBlenderGeneratorChild) represents an animation that can be blended, and has a parameter called Weight, which is the speed corresponding to the respective animation. When the current speed of the creature is between the weights of two such animations, the resulting animation is blended from those two animations proportionally. So, you need to set those weights to values for which the respective animations were made.


Creating creature collision[edit]

For creature physics to work, you need provide two things in the skeleton: a bounding box, and collision. You can either make them in NifSkope (a very long and painful process) or export from your 3d editor to fbx together with the skeleton. Let’s follow the second route using Blender. In this case, the .blend file you are exporting from needs to have three things:

Blender view showing the skeleton represented as an armature, alongside the bounding box.
Blender view showing the skeleton represented as empties, including colliders (as mesh children) and constraints (as empty children).
1. Armature representing your creature’s skeleton.
2. Empty called BoundingBox with child box mesh called BoundingBox_Box.
3. Hierarchy of empties replicating your skeleton. You don’t need to construct it manually: you can obtain it by exporting the skeleton nif with ck-cmd's exportfbx command.

Each empty corresponding to a bone can have mesh children representing bone colliders and empty children representing ragdoll constraints.

Colliders must be called either <bone name>_rb_capsule for a capsule shape, <bone name>_rb_sphere for a sphere shape, <bone name>_rb_box for a box shape or <bone name>_rb_convex for a convex shape. Note that collider pivot transform is ignored by ck-cmd, so transforms must be baked into the geometry. Mass and components of inertia tensor for colliders are calculated by ck-cmd, but can be too far off. In that case, you can set them as float custom properties named "mass", "inertiaX", "inertiaY", and "inertiaZ" on the collider mesh.

Constraints determine which motions are allowed in a ragdoll. A constraint is defined by an empty, which must be child of the constraint’s parent bone and must be called <parent bone name>_rb_con_<child bone name>_rb_attach_point. The constraint's orientation is defined by the orientation of the respective empty. There are two kinds of constraints: full-blown ragdoll constraints and simpler hinge constraints. Constraint type is defined by the string custom property "constraint_type". Set Ragdoll for a ragdoll constraint and Hinge otherwise. For ragdoll constraints, you need to provide the following parameters in string custom properties: "coneMaxAngle", "maxFriction", "planeMaxAngle", "planeMinAngle", "twistMaxAngle", and "twistMinAngle". For ragdoll constraints, you need provide the following parameters in string custom properties: "maxFriction", "maxAngle", and "minAngle". Check vanilla skeletons for good values of those parameters.

Fun fact again: since there are in essence two instances of the skeleton (one in the armature and another in the hierarchy of empties), ck-cmd makes two skeletons in the nif on export. So you will need to delete one.

Custom animated object idles[edit]

Properties of a custom AnimObjLoad event as seen in Skyrim Behavior Tool.

Skyrim includes a lot of idle animations in which some visible object is used, such as musical instruments, a pickaxe, buckets or firewood being carried, etc. Such objects are described by AnimObject records. But it appears that replacing those objects is impossible without behavior edits: when an animation event is fired and the behavior enters the respective state, it sends an AnimObjLoad event which contains a payload string with the EditorID of the AnimObject to be used. So, in order to create a new idle using an existing animation but with a different object, you need to do the following:

Skyrim Behavior Tool view of the (unedited) Flute AnimObject graph, showing what would need to be recreated in order to display a different object.
1. Open the defaultmale Havok project and navigate to the mt_behavior inside it. Find the state corresponding to the usage of the object of interest and copy it. Skyrim Behavior Tool doesn’t support copying, so you need to recreate the whole state hierarchy and add it to the same parent.
2. Replace the payload string of the AnimObjLoad event of your newly created state with your object’s EditorID.
3. Create new animation events for your object.
4. Find transitions to the original object’s state and copy them for your new state and animation events.
5. Create IDLE records for your new animation events as well as relevant idle markers.

Animated statics with custom behaviors[edit]

To do